Yamaha NIKEN MXT850 Owner'S Manual Download Page 72

Page: 72 / 106

Perio

ic maintenance an

justment

6-14

2. With the vehicle in an upright posi-

tion, look at the coolant level in the
reservoir.

3. If the coolant is at or below the

minimum level mark, remove the
coolant reservoir cap.

WARNING!

Remove only the coolant reser-
voir cap. Never attempt to re-
move the ra

iator cap when the

ine is hot.

[EWA15162]

4. Add coolant to the maximum level

mark.

NOTICE:

If coolant is not

availa

le, use

istille

water or

soft tap water instea

. Do not

use har

water or salt water

since it is harmful to the en

ine.

If water has

een use

instea

of coolant, replace it with cool-
ant as soon as possi

le, other-

wise the coolin

system will not

e protecte

ainst frost an

corrosion. If water has

een

to the coolant, have a

Yamaha

ealer check the anti-

freeze content of the coolant as
soon as possi

le, otherwise the

effectiveness of the coolant will

e re

uce

[ECA10473]

5. Install the coolant reservoir cap.

EAU33032

Chan

the coolant

The coolant must be changed at the in-
tervals specified in the periodic main-
tenance and lubrication chart. Have a
Yamaha dealer change the coolant.

WARNING! Never attempt to remove
the ra

iator cap when the en

ine is

hot.

[EWA10382]

1. Coolant reservoir
2. Maximum level mark
3. Minimum level mark

2
3

1. Coolant reservoir cap

UBD5E0E0.book Page 14 Wednesday, April 25, 2018 2:23 PM

Summary of Contents for NIKEN MXT850











































































































Search results

Summary of Contents for NIKEN MXT850

Reviews:

Related manuals for NIKEN MXT850

Brands by name

Popular brands

Yamaha NIKEN MXT850, Owner'S Manual

Search results

Summary of Contents for NIKEN MXT850

Reviews:

Related manuals for NIKEN MXT850

Brands by name

Popular brands