Yamaha NIKEN MXT850 Owner'S Manual Download Page 25 | Manualshive

Page: 25 / 106

background image

Instrument an

d

control functions

3-10

3

TIP

Pushing the power switch while the
system is operating will turn the sys-
tem off completely and erase the previ-
ously set cruising speed. You will not
be able to use the resume function until
a new cruising speed has been set.

Automatic deactivation of the cruise
control system
The cruise control system for this mod-
el is electronically controlled and is
linked with the other control systems.
The cruise control system will auto-
matically become deactivated under
the following conditions:



The cruise control system is not
able to maintain the set cruising
speed.



Wheel slip or wheel spin is detect-
ed. (If the traction control system
has not been turned off, the trac-
tion control system will work.)



The start/engine stop switch is set
to the “

” position.



The engine stalls.



The sidestand is lowered.

When traveling with a set cruising
speed, if the cruise control system is
deactivated under the above condi-
tions, the “

” indicator light will go off

and the “SET” indicator light will flash
for 4 seconds, and then go off.
When not traveling with a set cruising
speed, if the start/engine stop switch is
set to the “

” position, the engine

stalls, or the sidestand is lowered, then
the “

” indicator light will go off (the

“SET” indicator light will not flash).
If the cruise control system is automat-
ically deactivated, please stop and
confirm that your vehicle is in good op-
erating condition.
Before using the cruise control system
again, activate it using the power
switch.

TIP

In some cases, the cruise control sys-
tem may not be able to maintain the set
cruising speed when the vehicle is
traveling uphill or downhill.



When the vehicle is traveling up-
hill, the actual traveling speed may
become lower than the set cruis-

ing speed. If this occurs, acceler-
ate to the desired traveling speed
using the throttle.



When the vehicle is traveling
downhill, the actual traveling
speed may become higher than
the set cruising speed. If this oc-
curs, the setting switch cannot be
used to adjust the set cruising
speed. To reduce the traveling
speed, apply the brakes. When
the brakes are applied, the cruise
control system will become deac-
tivated.

UBD5E0E0.book Page 10 Wednesday, April 25, 2018 2:23 PM

«
...
23
24
25
26
27
...
»

Summary of Contents for NIKEN MXT850











































































































Reviews:

No comments

Related manuals for NIKEN MXT850

Brand: Yoshimura Pages: 7

Brand: R&G Pages: 12

Brand: R&G Pages: 24

Brand: KTM Pages: 38

Brand: GYS Pages: 36

Brand: yasuni Pages: 9

Brand: Leatt Pages: 23

Brand: DYNATEK Pages: 4

Brand: ACERBIS Pages: 72

Brand: Race Dynamics Pages: 25

Brand: Shad Pages: 2

Brand: Shad Pages: 2

Brand: Shad Pages: 2

Brand: Shad Pages: 2

TOPMASTER H0PC10ST

Brand: Shad Pages: 2

Brand: Shad Pages: 2

Brand: Innovv Pages: 2

Brand: Benelli Pages: 243

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands