Odometer and tripmeter modes
Pushing the button switches the dis-
play between the odometer mode
“ODO” and the tripmeter “TRIP” in
the following order:
ODO
씮
TRIP
씮
ODO
If the fuel level warning indicator
comes on (see page 3-2), the odome-
ter display will automatically change
to the fuel reserve tripmeter mode
“TRIP F” and start counting the dis-
tance traveled from that point. In that
case, pushing the button switches the
display between the various tripmeter
and odometer modes in the following
order:
TRIP F
씮
ODO
씮
TRIP
씮
TRIP F
To reset a tripmeter, select it by pus-
hing the button, and then push it
again for at least three seconds. If you
do not reset the fuel reserve tripmeter
manually, it will reset itself automati-
cally and the display will return to the
prior mode after refueling and trave-
ling 5 km (3 mi).
TIP
The display cannot be changed back
to “TRIP F” after pushing the button.
Oil change indicator “Oil change”
This indicator comes on at the initial
1000 km (600 mi) and every 3000 km
(1800 mi) thereafter to indicate that
the engine oil should be changed.
(See page 6-8)
Fuel gauge
The fuel gauge indicates the amount
of fuel in the fuel tank. The display
segments of the fuel gauge disappear
towards “E” (Empty) as the fuel level
decreases. When only two segments
are left near “E”, the fuel level warning
indicator comes on. Refuel as soon
as possible.
RESET/
SELECT
RESET/
SELECT
RESET/
SELECT
RESET/
SELECT
RESET/
SELECT
INSTRUMENT AND CONTROL FUNCTIONS
3-5
3
