background image

 

1

 

1. CONTENTS 

1.  Contents  ........................................................................................................................  1 

2.  Control location  ..............................................................................................................  3 

3.  Before riding  ..................................................................................................................  4 

4.  Safe riding  .....................................................................................................................  4 

5.  Driving  ...........................................................................................................................  5 

6.  Use genuine spare parts  ...............................................................................................  5 

7.  Use of each component  .................................................................................................  6 

Gauges  ..........................................................................................................................  6 

Operation of ignition switch  ...........................................................................................  7 

Operation of steering handle lock switch  .......................................................................  7 

Operation of seat open switch  .......................................................................................  7 

Use of buttons  ............................................................................................................... 7 

Storage box ...................................................................................................................... 9 

Safety helmet hook......................................................................................................... 10 

Fuel tank cap................................................................................................................. 10 

Brake ............................................................................................................................. 10 

8.  Important points and cautions for starting engine  ........................................................ 11 

9.  The best way to drive off  ..............................................................................................  12 

The control of throttle valve handle  ..............................................................................  12 

Parking method  ...........................................................................................................  12 

10.Inspection and maintenance before riding  ...................................................................  13 

Routine inspection  .......................................................................................................  13 

Engine oil inspection and change  ................................................................................  13 

Fuel inspection ..............................................................................................................  14 

Transmission oil inspection and change ....................................................................... 14 

Inspection and adjustment of brake free play  .............................................................. 15 

Disc brake inspection (depending on models)  ............................................................. 16 

Throttle valve handle clearance adjustment  ................................................................  17 

Inspection and maintenance of battery  ........................................................................  17 

Tire inspection  .............................................................................................................  18 

Steering handle front shock absorbers inspection  .......................................................  18 

Checking and changing fuses  .....................................................................................  19 

Checking the turn signal lights and horn  .....................................................................  19 

Checking the front and rear lights  ................................................................................  19 

Checking the brake light  ..............................................................................................  19 

 

http://www.motorcycle.in.th

Summary of Contents for AD12W1-6

























Reviews: