Yamaha NEO'S YN50FU Owner'S Manual Download

Page: 27 / 76

EAUM1191

Storage compartment

1. Storage compartment

There is a storage compartment
under the seat. (See page 3-11).

EWA10961

Do not exceed the load limit of
5 kg (11.0 lb) for the storage
compartment.

Do not exceed the maximum
load of 163 kg (359 lb) for the
vehicle.

ECA10080

Keep the following points in mind
when using the storage compart-
ment.

Since the storage compart-
ment accumulates heat when
exposed to the sun, do not sto-
re anything susceptible to heat
inside it.

To avoid humidity from sprea-
ding through the storage com-
partment, wrap wet articles in
a plastic bag before storing
them in the compartment.

Since the storage compart-
ment may get wet while the
scooter is being washed, wrap
any articles stored in the com-
partment in a plastic bag.

Do not keep anything valuable
or breakable in the storage
compartment.

To store a helmet in the storage com-
partment, place the helmet with the
front facing backward.

TIP

Some helmets cannot be stored
in the storage compartment
because of their size or shape.

Do not leave your scooter unat-
tended with the seat open.

NOTICE

WARNING

INSTRUMENT AND CONTROL FUNCTIONS

3-12

Summary of Contents for NEO'S YN50FU













































































Search results

Summary of Contents for NEO'S YN50FU

Reviews:

Related manuals for NEO'S YN50FU

Brands by name

Popular brands

Yamaha NEO'S YN50FU, Owner'S Manual

Search results

Summary of Contents for NEO'S YN50FU

Reviews:

Related manuals for NEO'S YN50FU

Brands by name

Popular brands