Description of the Device
NUAGE FADER Operation Manual
14
SECTION CONTROL Section
Overview
This section is for operating the “Section” view of “Mixer”
and selecting the controllable parameters of the [Multi
function knobs] (
) in the CHANNEL STRIP section.
The buttons [QUICK CTRL], [PRE], [ROUTING], [PAN],
[SENDS], [CUES], [INSERT], [DYN], and [EQ] are for
selecting the “Section” view and the controllable
parameters of the [Multi function knobs]. For example,
when you press [EQ], the “Section” view changes to the
“EQ” view and the controllable parameters of the [Multi
function knobs] change to “EQ.”
When you press [EQ] again, the “Section” view and the
controllable parameters of the [Multi function knobs]
revert back to the default (meaning that none of the
buttons such as [QUICK CTRL] and [PRE] are turned on).
The same applies when Channel Setting mode is active
for the CHANNEL STRIP section in question.
Depending on which controllable parameters are selected
in the SECTION CONTROL section, the [Multi function
knob] has the following functions.
When you operate the [Multi function knob] while holding
down the appropriate button(s) in the “MODIFIER Section”
(
), the function changes as follows.
The buttons [Sub parameter 1] – [Sub parameter 8] and
[
]/[
] are for selecting the parameter type or slot of the
controllable parameters of the [Multi function knobs].
Operation
Function
Touching
• Highlights the parameter.
• Shows the pop-up window.
Turning
• Adjusts the parameter.
• Selects the parameter.
• Moves the cursor.
Pressing
• Shows the pop-up window.
• Sets the selected parameter.
• Opens and closes the folder.
Simultaneously
holding down and
turning
Adjusts the parameter finely (fine mode).
Operation
Function
Simultaneously
holding down [SHIFT]
and turning knob
Adjusts the parameter finely (fine mode).
Simultaneously
holding down [CTRL]
and pressing knob
Resets the parameter to the default
value.
