File
Remote
MX49 MX61 MX88 Reference Manual
Switching the functions for
Knobs [A] – [D]
Switching the Control
Template
71
Switching the functions for Knobs [A] – [D]
Each Control Template has three sets of functions assigned to Knobs [A] – [D]. Press [KNOB FUNCTION] to switch the
function set.
Switching the Control Template
To switch the Control Templates of the instrument, use the [KEYBOARD] button or [PIANO] button. Pressing
[KEYBOARD]/[PIANO] increases or decreases the Template number. When a specified time has elapsed after the
display which switches the Template is shown, operation returns to the previous display. When the Control Template is
switched on the instrument, the Template will also be switched on the Remote Editor.
NOTE
If Remote Tools has been installed in your computer, switching the VSTi on Cubase links to the Control Template on the
instrument.
NOTE
If you wish to edit the Control Template or create a new Template, you need to use the MX49/MX61 Remote Editor. When editing
the Control Template, 50 Control Templates including the edited Templates can be saved to internal memory by pressing
[STORE] in the Remote Mode on the instrument.
Utility settings
Pressing [UTILITY] in the Remote mode conveniently calls up only the Utility settings relevant to the Remote mode. The
parameters of this display are linked to the Remote display (
) of Utility.
Remote
*
Template
03:HALionSonicSE
Manual Development Group
©2012 Yamaha Corporation
Published 04/2017 MW-B0
