Yamaha MWS150-A Owner'S Manual Download Page 65

Page: 65 / 98

Perio

ic maintenance an

justment

7-18

Cleanin

the V-

elt case check hose

1. Check the hose on the rear side of

the V-belt case for accumulated
dirt or water.

2. If dirt or water is visible, remove

the hose from the clamp, clean it,
and then install it.

TIP

If dirt or water was found in the check
hose, be sure to check the V-belt case
air filter element for excessive dirt or
damage and clean or replace it if nec-
essary.

Cleanin

the V-

elt case air filter el-

ement

1. Place the vehicle on the center-

stand.

2. Remove the screws, and then pull

the V-belt case air filter element
cover outward and away from the
V-belt case.

3. Pull the V-belt case air filter ele-

ment out, and then clean it with
solvent. After cleaning, remove
the remaining solvent by squeez-
ing the element.

WARNING! Use

only a

icate

parts cleanin

solvent. To avoi

the risk of fire

or explosion,

o not use

aso-

line or solvents with a low flash

point.

[EWA10432]

NOTICE:

To avoi

ama

the air filter element,

han

le it

ently an

carefully,

o not twist it.

[ECA10522]

4. Apply oil of the recommended

type to the entire surface of the
sponge material, and then
squeeze the excess oil out.

1. V-belt case check hose

1. V-belt case air filter element cover
2. Screw

1. V-belt case air filter element

UBE2EYE0.book Page 18 Monday, July 17, 2017 2:03 PM

Summary of Contents for MWS150-A



































































































Search results

Summary of Contents for MWS150-A

Reviews:

Related manuals for MWS150-A

Brands by name

Popular brands

Yamaha MWS150-A, Owner'S Manual

Search results

Summary of Contents for MWS150-A

Reviews:

Related manuals for MWS150-A

Brands by name

Popular brands