14
En
OTHER FUNCTIONS AND INFORMATION
You can update the firmware only when the unit is connected to the Internet (
P.6).
Follow the instructions in the MusicCast CONTROLLER app to update.
The power indicator flashes quickly while the firmware is being updated.
Updating completed: The unit restarts.
Updating failed: All the indicators flash. Unplug the power cable from the wall outlet and plug it in after 30 seconds or more,
then update the firmware again.
• Do not operate the unit or disconnect the power cable or network cables while updating.
• Do not turn off the unit (enter standby mode) while updating the firmware.
y
• The update of the firmware will be informed in the app.
• When Internet speed is not fast enough or the unit is connected to the wireless network via a wireless network adapter,
network update may not be possible depending on the condition of the wireless connection.
To set the following option settings, set this unit to the standby mode, and touch and hold
and
for 5 seconds.
*1
*1: If you do not tap any button during these 5 seconds, the unit will cancel the option setting mode.
*2: Network Standby is a standby mode which enables the unit to connect to the network by operating another device.
y
Eco Standby
You can only enable/disable Network Standby mode in the option settings as long as the unit is in Eco Standby mode.
If you disable Network Standby, the unit enters Eco Standby mode, which keeps the standby power consumption to a
minimum. However, you cannot start up the unit with the MusicCast CONTROLLER app during Eco Standby mode.
UPDATING THE FIRMWARE
OPTION SETTINGS
Items
Operations
Initialize the network setting.
Touch and hold
(power)/CONNECT
for 3 seconds (
P.3).
Enable/disable Network Standby
mode.
*2
A
Touch and hold
for 3 seconds. Network Standby will be disabled. To enable it, perform the same
operation.
Enable: The power indicator flashes twice and remains lit.
Disable: The power indicator flashes twice and turns off.
B
Tap
(power)/CONNECT
once to turn on the unit.
The setting is complete.
Enable/disable Wi-Fi.
Touch and hold
for 3 seconds. Wi-Fi will be disabled. To enable it, perform the same operation.
Enable: The network indicator flashes twice and remains lit.
Disable: The network indicator flashes twice and turns off.
Enable/Disable
Bluetooth
.
Touch and hold
for 3 seconds.
Bluetooth
will be disabled. To enable it, perform the same operation.
Enable: The
Bluetooth
indicator flashes twice and remains lit.
Disable: The
Bluetooth
indicator flashes twice and turns off.
Note
Summary of Contents for MusicCast WX-030BL
Page 178: ......
