manualshive.com logo in svg

Yamaha MU100, Owner'S Manual

Share
Download
Yamaha MU100 Owner'S Manual Download Page 94

Multi Mode

97

Expression (Expresn)

Range:

000 — 127

This determines the Expression setting for
the selected Part’s Voice.

Pan

Settings:

Rnd (Random),

L63 — C — R63

This determines the stereo position of the
selected Part’s Voice. A setting of “Rnd”
(Random) randomly assigns the Voice to
a pan position. This is useful when you
want to have different Voices sound from
different random parts of the stereo im-
age. (The Random setting does not affect
the A/D input Parts.)

Reverb Send (RevSend)

Range:

000 — 127

This determines the level of the selected
Part’s Voice that is sent to the Reverb ef-
fect. A value of 000 results in a completely
“dry” Voice sound.

NOTE

Keep in mind that the Reverb effect must be
properly enabled and set for this parameter
to work as intended. (See page 134.)

Part Controls

Chorus Send (ChoSend)

Range:

000 — 127

This determines the level of the selected
Part’s Voice that is sent to the Chorus ef-
fect. A value of 000 results in a completely
“dry” Voice sound (no Chorus effect).

NOTE

Keep in mind that the Chorus effect must be
properly enabled and set for this parameter
to work as intended. (See page 135.)

Variation Send (VarSend)

Settings:

off, on (when Variation Con-
nection is set to INS);
000 — 127 (when Variation
Connection is set to SYS)

This determines whether the selected Part’s
Voice is sent to the Variation effect or not.
A setting of “off” or “000” results in no
Variation effect being applied to the Voice.

Note Shift (NoteSft)

Range:

–24 — +24 semitones

This determines the key transposition set-
ting for the Part’s Voice.

Summary of Contents for MU100



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands