manualshive.com logo in svg

Yamaha MU100, Owner'S Manual

Share
Download
Yamaha MU100 Owner'S Manual Download Page 6

Unpacking

How to Use This Manual

7

MU100

Serial No.:

PA-5B AC Power Adaptor

*

Owner’s Manual

CD-ROM “XGtools”

Unpacking

Your MU100 package should include the items listed below. Make sure that
you have them all. Also, write down the serial number of your MU100 in the
box below, for future reference.

GM System Level 1

“GM System Level 1” is a standard specification that defines the arrange-
ment of voices in a tone generator and its MIDI functionality, ensuring
that data can be played back with substantially the same sounds on any
GM-compatible tone generator, regardless of its manufacturer or model.
Tone generators and song data that meet the “GM System Level 1” bear
this GM logo.

XG

“XG” is a tone generator format that expands the voice arrangement of the
“GM System Level 1” specification to meet the ever-increasing demands
of today’s computer peripheral environment, providing richer expressive
power while maintaining upward compatibility of data. “XG” greatly ex-
pands “GM System Level 1” by defining the ways in which voices are ex-
panded or edited and the structure and type of effects.
When commercially available song data bearing the XG logo is played
back on a tone generator which bears the XG logo, you will enjoy a full
musical experience that includes unlimited expansion voices and effect
functions.

About the XG Plug-in System

This system offers powerful expansion and upgrade capabilities for XG-
Plug-in-compatible tone generators.
The XG Plug-in System enables you to equip the tone generator with the
latest and most sophisticated technology, ensuring that you keep pace with
the rapid and multi-faceted advance in modern music production.

* Power supply recommendation may vary from country to country.

Please check with your nearest Yamaha dealer for further details.

Summary of Contents for MU100



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands