manualshive.com logo in svg

Yamaha MU100, Owner'S Manual

Share
Download
Yamaha MU100 Owner'S Manual Download Page 47

Guided Tour

49

Single Part Controls

You can make changes to each individual Part by using the Single Part con-
trols. These are displayed in the Multi Play mode, and give you at-a-glance
confirmation and control of the important basic settings of the selected Part.
If the Multi mode was active when you last turned the power off, the next
time you turn the power on, the Single Part controls are automatically called
up.

Let’s take a look at the Play display again:

       PART         MIDI      BANK/PGM#  VOL 

 

EXP  PAN 

 

 REV CHO  VAR    KEY

Each of these settings are made independently for each Part. For example,
each Part could have a different Volume setting, or a different Pan setting.
Try going through the brief sections below and making some changes in the
Part controls yourself.

Voice name, bank number and program number.

Note Shift
(key transpose).

Chorus Send.

Reverb Send.

Variation Send.

Pan (stereo position).

Expression.

MIDI receive
channel.

Volume.

Part number. (Change this with the 

[PART 

-

/

+

]

 buttons.)

Editing in the Multi Mode

Summary of Contents for MU100



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands