36
MU100 MIDI
2.1.3.1
XG System On
This system exclusive message causes the MU100
to function as an "XG"-compatible tone generator.
11110000
F0H
Exclusive status
01000011
43H
YAMAHA ID
0001nnnn
1NH
N:device Number
01001100
4CH
Model ID
00000000
00H
Address High
00000000
00H
Address Mid
01111110
7EH
Address Low
00000000
00H
Data
11110111
F7H
End of Exclusive
When On is received, the SOUND MODULE
MODE will be set to XG, and all MIDI messages
defined by XG such as NRPN or bank select etc.
can be received.
Since approximately 50[ms] are required in order
to execute this message, please allow an
appropriate interval before transmitting the next
message.
2.1.3.2
XG System parameter change
This message sets the XG SYSTEM block (refer
to tables <1 -1>, <1 - 2>).
2.1.3.3
Multi Effect1 parameter change
This message sets the MULTI EFFECT1 block
(refer to tables <1 - 1>, <1 - 4>).
2.1.3.4
Multi EQ parameter change
This message sets the MULTI EQ block (refer to
tables <1 - 1>, <1 - 5>).
2.1.3.5
Multi Effect2 parameter change
This message sets the MULTI EFFECT2 block
(refer to tables <1 - 1>, <1 - 6>).
2.1.3.6
Display parameter change
This message sets the DISPLAY block (refer to
tables <1 - 1>, <1 - 8>).
2.1.3.7
Multi Part parameter change
This message sets the MULTI PART block (refer
to tables <1 - 1>, <1 - 9>).
2.1.3.8
AD Part parameter change
This message sets the AD PART block (refer to
tables <1 - 1> , <1 - 10>).
2.1.3.9
AD System parameter change
This message sets the AD SYSTEM block (refer
to tables <1 - 1>, <1 - 11>).
2.1.3.10 Drums Setup parameter change
This message sets the DRUMS SETUP block
(refer to tables <1 - 1> , <1 - 12>).
2.1.4
MU100 native parameter change (1)
This message sets parameters unique to the MU100. Each
message sets a single parameter.
As indicated below, the message format is in common with
the MU50, MU80, and MU90.
11110000
F0H
Exclusive status
01000011
43H
YAMAHA ID
0001nnnn
1NH
N:Device Number
01001001
49H
Model ID
0ggggggg
GGH
Address High
0mmmmmmm
MMH
Address Mid
0lllllll
LLH
Address Low
0vvvvvvv
VVH
Data
:
:
11110111
F7H
End of Exclusive
For parameters whose Data Size is 2 or 4, the number of
data bytes indicated by Size are transmitted.
2.1.4.1
MU100 System parameter
change
This message sets the SYSTEM block (refer to
tables <2 - 1>, <2 - 2>).
2.1.4.2
Remote Switch
This message sets the REMOTE SWITCH (refer
to tables <2 - 1>, <2 - 3>).
2.1.5
MU100 native parameter change (2)
This message sets parameters which are unique to the
MU100. Each message modifies a single parameter.
The format of this message is the same as for the MU90, as
shown below.
11110000
F0H
Exclusive status
01000011
43H
YAMAHA ID
0001nnnn
1NH
N:Device Number
01011001
59H
Model ID
0ggggggg
GGH
Address High
0mmmmmmm
MMH
Address Mid
0lllllll
LLH
Address Low
0vvvvvvv
VVH
Data
:
:
11110111
F7H
End of Exclusive
For parameters whose Data Size is 2 or 4, the number of
data bytes indicated by Size are transmitted.
2.1.5.1
Current Performance parameter
change
This message sets the CURRENT PERFORMANCE
block (refer to tables <3 - 1>, <3 - 2>).
MIDI data format
