Yamaha MU10, Owner'S Manual

Page: 27 / 64

26
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
You can select the Voice banks with MSB and LSB
numbers. MSB and LSB functions differently
depending on the play mode.
In XG mode, MSB numbers select Voice type
(Normal Voice or Drum Voice), and LSB numbers
select Voice banks. In TG300B mode, LSB is fixed,
and MSB numbers select Voice banks.(See Voice Lists
on page 42 – 49)
A new bank selection will not become effective until
the next Program Change message is received.
1.2.2 Modulation
Messages which control vibrato depth.
CNTRL# PARAMETER DATA RANGE
1 Modulation 0...127
A setting of 0 = vibrato off, and a setting of 127 =
maximum vibrato.
1.2.3 Portamento Time
Messages which control the duration of portamento,
or a continuous pitch glide between successively
played notes.
CNTRL# PARAMETER DATA RANGE
5 Portamento Time 0...127
When the parameter 1.2.9 Portamento = ON, values
will adjust the speed of pitch change.
A setting of 0 = minimum portamento time, and 127
= maximum portamento time.
1.2.4 Data Entry
Messages which set the value for the parameter
specified by RPN/NRPN.
CNTRL# PARAMETER DATA RANGE
6 Data Entry MSB 0...127
38 Data Entry LSB 0...127
Parameter value is determined by combining MSB
and LSB.
1.2.5 Main Volume
Messages which control the volume of each Part.
CNTRL# PARAMETER DATA RANGE
7 Main Volume 0...127
A setting of 0 = minimum volume, and 127 =
maximum volume.
1.2.6 Pan
Messages which control the stereo panning position of
each Part.
CNTRL# PARAMETER DATA RANGE
10 Pan 0...127
A setting of 0 = extreme left position, and 127 =
extreme right position.
MIDI Data Format
1.2.7 Expression
Messages which control intonation expression of each Part.
CNTRL# PARAMETER DATA RANGE
11 Expression 0...127
A setting of 0 = minimum expression volume, and
127 = maximum expression volume.
1.2.8 Hold1
Messages which control sustain on/off.
CNTRL# PARAMETER DATA RANGE
64 Hold1 0...127
Settings between 0-63 = sustain off, and settings
between 64-127 = sustain on.
1.2.9 Portamento
Messages which control portamento on/off.
CNTRL# PARAMETER DATA RANGE
65 Portamento 0...127
Settings between 0-63 = portamento off, and settings
between 64-127 = portamento on.
The parameter 1.2.3 Portamento Time controls the
portamento speed.
1.2.10 Sostenuto
Messages which control sostenuto on/off.
CNTRL# PARAMETER DATA RANGE
66 Sostenuto 0...127
Holding specific notes and then pressing and holding
the sostenuto pedal will sustain those notes as you
play subsequent notes, until the pedal is released.
Settings between 0-63 = sostenuto off, and settings
between 64-127 = sostenuto on.
1.2.11 Soft Pedal
Messages which control soft pedal on/off.
CNTRL# PARAMETER DATA RANGE
67 Soft Pedal 0...127
Notes played while holding the soft pedal will be
dampened. Settings between 0-63 = soft pedal off, and
settings between 64-127 = soft pedal on.
1.2.12 Harmonic Content
Messages which adjust the resonance set for each
Voice.
CNTRL# PARAMETER DATA RANGE
71 Harmonic Content 0...127 (0 : -64, 64 : +0,
127 : +63)
The value set here is an offset value which will be
added to or subtracted from the Voice data.
Higher values will result in a more resonant sound.
Depending on the Voice, the effective range may be
narrower than the range available for adjustment.