Yamaha MTM690 Owner'S Manual Download

Page: 60 / 98

Perio

ic maintenance an

justment

6-13

NOTICE

ECA20860

If the oil pressure warnin

ht flick-

ers or remains on even if the oil level
is correct, imme

iately turn the en-

ine off an

have a Yamaha

ealer

check the vehicle.

13. Turn the engine off, wait a few

minutes until the oil settles, and
then check the oil level and cor-
rect it if necessary.

EAUS1203

Coolant

The coolant level should be checked
regularly. In addition, the coolant must
be changed at the intervals specified in
the periodic maintenance chart.

TIP

If genuine Yamaha coolant is not avail-
able, use an ethylene glycol antifreeze
containing corrosion inhibitors for alu-
minum engines and mix with distilled
water at a 1:1 ratio.

EAU20097

To check the coolant level

Since the coolant level varies with en-
gine temperature, check when the en-
gine is cold.

1. Park the vehicle on a level surface.

2. With the vehicle in an upright posi-

tion, look at the coolant level in the
reservoir.

3. If the coolant is at or below the

minimum level mark, remove the
coolant reservoir cap.

WARNING!

Remove only the coolant reser-
voir cap. Never attempt to re-
move the ra

iator cap when the

ine is hot.

[EWA15162]

Recommen

coolant:

YAMALUBE coolant

Coolant quantity:

Coolant reservoir (max level mark):

0.25 L (0.26 US qt, 0.22 Imp.qt)

Radiator (including all routes):

1.60 L (1.69 US qt, 1.41 Imp.qt)

1. Coolant reservoir
2. Maximum level mark
3. Minimum level mark

UBU3E1E0.book Page 13 Monday, June 4, 2018 5:20 PM

Summary of Contents for MTM690



































































































Search results

Summary of Contents for MTM690

Reviews:

Related manuals for MTM690

Brands by name

Popular brands

Yamaha MTM690, Owner'S Manual

Search results

Summary of Contents for MTM690

Reviews:

Related manuals for MTM690

Brands by name

Popular brands