Yamaha MTM690, Owner'S Manual

Page: 33 / 98

Instrument an d control functions
3-18
3
EAU55512
Fuel tank b reather hose an d
overflow hose
Before operating the motorcycle:

Check each hose connection.

Check each hose for cracks or
damage, and replace if necessary.

Make sure that the end of each
hose is not blocked, and clean if
necessary.

Make sure that each hose is rout-
ed through the clamp.

Make sure that the paint mark on
each hose is below the clamp.
EAU13434
Catalytic converter
This model is equipped with a catalytic
converter in the exhaust system.
WARNING
EWA10863
The exhaust system is hot after op-
eration. To prevent a fire hazar
d or
b urns:

Do not park the vehicle near
possi
b le fire hazar d s such as
g rass or other materials that
easily b urn.

Park the vehicle in a place
where pe
d estrians or chil d ren
are not likely to touch the hot
exhaust system.

Make sure that the exhaust sys-
tem has coole
d d own b efore
d oin g any maintenance work.

Do not allow the en g ine to i d le
more than a few minutes. Lon g
i d lin g can cause a b uil d -up of
heat.
NOTICE
ECA10702
Use only unlea d e d g asoline. The use
of lea d e d g asoline will cause unre-
paira b le d ama g e to the catalytic
converter.
1. Fuel tank overflow hose
2. Fuel tank breather hose
3. Original position (paint mark)
4. Clamp
4
3
1 2
UBU3E1E0.book Page 18 Monday, June 4, 2018 5:20 PM