41
Memory Functions
User’s Guide
5
Memory Functions
Memo Function
Store a memory location
You can mark two memory locations which can be used to quickly return to a specific point on your tape.
1)
Fast-wind or rewind the tape to the location you want stored.
For example, you can locate the end of a track just by stopping the tape.
2)
Press the MEMO-1 or MEMO-2 key (
O
).
The corresponding MEMO indicator (
a
) will flash three times and then light.
Check the memory locations
1)
Press and hold the CHECK key (
N
).
2)
Press the appropriate MEMO key.
The tape counter (
Y
) will display the corresponding memory point value. The number portion of
the MEMO indicator will flash for as long as the two keys are pressed.
The following display shows the MEMO-2 location being checked.
Locate to a stored location
1)
Press the appropriate LOCATE key (
P
).
The MT4X will fast-wind or rewind the tape to the stored location. While the tape is in motion, the
number portion of the MEMO indicator will flash.
The following display shows the results of pressing the LOCATE-2 key.
If you reset the tape counter, the MT4X will re-calculate the stored memory locations. When you
check a memory location, the value displayed will reflect the reset tape counter. When you locate to
a memory location, the MT4X will fast-wind or rewind to the correct location.
Note:
The locate interval must be more than three counts on the tape counter.
TAPE
9.5
MEMO
1
+9
6
3
0
3
6
10
-20
+9
6
3
0
3
6
10
-20
1
2
3
4
L
R
TAPE
9.5
MEMO
1
2
+9
6
3
0
3
6
10
-20
+9
6
3
0
3
6
10
-20
1
2
3
4
L
R
TAPE
9.5
MEMO
1
2
+9
6
3
0
3
6
10
-20
+9
6
3
0
3
6
10
-20
1
2
3
4
L
R
