Instrument and control functions
5-20
1
2
3
4
5
6
7
8
9
10
11
12
Compression damping force
The compression damping force is ad-
justed on the left front fork leg only.
To increase the compression damping
force and thereby harden the compres-
sion damping, turn the adjusting screw
in direction (a). To decrease the com-
pression damping force and thereby
soften the compression damping, turn
the adjusting screw in direction (b).
TIP
Be sure to perform this adjustment on
the left front fork leg.
TIP
When adjusting the damping force
settings, turn the adjuster in direc-
tion (a) until it stops, and then
count the clicks in direction (b).
Although a damping force adjuster
may click beyond the stated mini-
mum settings, such adjustments
are ineffective and may damage
the suspension.
When turning a damping force ad-
juster in direction (a), the 0 click
position and the 1 click position
may be the same.
EAU57943
Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring and a rebound damping force
adjusting screw.
NOTICE
ECA10102
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Spring preload
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring in direction (a). To de-
crease the spring preload and thereby
soften the suspension, turn the adjust-
ing ring in direction (b).
1. Compression damping force adjusting
screw
1
(a)
(b)
Compression damping setting:
Minimum (soft):
11 click(s) in direction (b)
Standard:
11 click(s) in direction (b)
Maximum (hard):
0 click(s) in direction (b)
BS2-9-13.book 20 ページ 2019年7月25日 木曜日 午前11時1分
Summary of Contents for MT09 2020
Page 110: ...BS2 9 13 book 3...
Page 112: ...PRINTED IN JAPAN 2019 08 1 1 1 E...