Yamaha MT-10 2023, Owner'S Manual

Page: 52 / 134

Instrument and control functions
5-24
1
2
3
4
5
6
7
8
9
10
11
12
13
4. Select the desired information dis-
play item with the wheel switch.
TIP
The information display items which
can be selected are:
A.TEMP: air temperature
C.TEMP: coolant temperature
TRIP-1: tripmeter 1
TRIP-2: tripmeter 2
ODO: odometer
SPEED: cruise control speed set-
ting
FUEL AVG: average fuel consumption
CRNT FUEL: current fuel consumption
FUEL CON: the amount of fuel con-
sumed
5. Select “STREET MODE 1-2” or
“TRACK MODE” to set the remain-
ing DISPLAY-1 group items.
6. Select the triangle symbol to exit.
To set the other display groups, re-
peat from step 3.
“Brightness”
This module allows you to adjust the
general brightness level of the display
screen.
“Grip Warmer Setting” (if equipped)
This module is for adjusting the temper-
ature values for the grip warmer pre-
sets (LO/MIDDLE/HIGH). Each preset
can be set from 1 (low heat) to 10 (high
heat).
“Clock”
This module allows you to set the clock.
“All Reset”
This module resets everything, except
the odometer and clock, to its factory
preset or default setting.
Select YES to reset all items. After se-
lecting YES, all items will be reset and
the screen will automatically return to
the MENU screen.
STREET MODE 1 - 1 A.TEMP
C.TEMP
C.TEMP
Display Setting
DISPLAY-1
GPS 10:00
TRACK MODE
STREET MODE 1 - 2
MPH
STREET MODE 1 - 1 A.TEMP
C.TEMP
C.TEMP
Display Setting
DISPLAY-1
GPS 10:00
TRACK MODE
STREET MODE 1 - 2
MPH
STREET MODE 1 - 1 A.TEMP
C.TEMP
C.TEMP
Display Setting
DISPLAY-1
GPS 10:00
TRACK MODE
STREET MODE 1 - 2
MPH
B5Y-28199-11-E0.book 24 ページ ２０２２年９月６日 火曜日 午前１０時２８分