Yamaha MT-10 2023, Owner'S Manual

Page: 94 / 134

Periodic maintenance and adjustment
8-19
1
2
3
4
5
6
7
8
9
10
11
12
13
could lead to an accident.

Always make sure that the valve
caps are securely installed to
prevent air pressure leakage.

Use only the tire valves and
valve cores listed below to
avoid tire deflation during a
high-speed ride.

The tire air valve original posi-
tion is with the valve cap point-
ing to the right side of the
vehicle, perpendicular (90 de-
gree right angle) to the axis
(center line) of the wheel. If the
tire air valve becomes mis-
aligned, do not twist it back to
its original position by yourself.
Otherwise, leakage may occur.
Have a Yamaha dealer inspect
the valve.
After extensive tests, only the tires list-
ed below have been approved for this
model by Yamaha.
WARNING
EWA10601
This motorcycle is fitted with su-
per-high-speed tires. Note the fol-
lowing points in order to make the
most efficient use of these tires.

Use only the specified replace-
ment tires. Other tires may run
the danger of bursting at super
high speeds.

Brand-new tires can have a rela-
tively poor grip on certain road
surfaces until they have been
“broken in”. Therefore, it is ad-
visable before doing any
high-speed riding to ride con-
servatively for approximately
100 km (60 mi) after installing a
new tire.

The tires must be warmed up
before a high-speed run.

Always adjust the tire air pres-
sure according to the operating
conditions.
Front tire:
Size:
120/70ZR17M/C(58W)
Manufacturer/model:
BRIDGESTONE/BATTLAX HY-
PERSPORT S22F
Rear tire:
Size:
190/55ZR17M/C(75W)
Manufacturer/model:
BRIDGESTONE/BATTLAX HY-
PERSPORT S22R
FRONT and REAR:
Tire air valve:
PVR251
B5Y-28199-11-E0.book 19 ページ ２０２２年９月６日 火曜日 午前１０時２８分