Yamaha MOX8 Reference Manual Download Page 104

Page: 104 / 160

MOX6/MOX8 Reference Manual

Pattern Mode

Pattern Record Standby

During Pattern Recording

[F1] SETUP

[F3] RESET

[F4] TIE

[F5] DELETE

[F6] BAK DEL

Pattern Edit

[F1] CHANGE

[F2] VIEW FLT

[F5] INSERT

[F6] DELETE

Supplementary Information

104

During Pattern Recording

When recording the Pattern Track, you can change the Section. When recording the tempo Track, you can change the

tempo value. When the Scene Track is selected, you can record Track muting settings.

Pattern Chain Edit

[F1] CHANGE

The Pattern Chain Edit mode makes it possible to edit the order of the Sections in a chain, as well as insert tempo, and

scene/mute event data. Call up the desired Track display by pressing the [F4] TR SEL button to edit the selected Track.

Pattern Track Edit

From this display, you can edit the Section changes for each measure. To set the end of the chain, enter an END
mark at the appropriate measure. To clear the event at the currently selected location, press the [F6] CLEAR
button.

Scene Track Edit

You can edit the Track mute change in beats. Use the [F5] INSERT and [F6] DELETE buttons to insert/delete the
event.

Tempo Track Edit

You can edit the tempo change in beats.
Use the [F5] INSERT and [F6] DELETE buttons to insert/delete the event.

[F2] COPY

This display lets you copy all Pattern chain events from a specified range of measures (source) to a destination location.

After specifying the source range in measures, the top measure of the destination location, and “NumberOfTimes”

(number of times the data is copied), press the [ENTER] button to execute the Copy operation.

NOTICE

This operation overwrites any events already existing at the destination.

[F3] SONG

This function converts the Pattern chain data to Song data (standard MIDI format) and places the results in normal Song

Tracks. After specifying the desired destination Song and measure number to which the converted data is to be copied,

press the [ENTER] button to execute. When the “without PC” (without Program Change) box is checkmarked, the

settings of the Mixing and Tempo are copied to the destination Song. The Tempo value is copied to the top measure of

the destination Song. When the checkmark is removed, the Voice settings in each Phrase are also copied to the top

measure of the destination Song as Program Change events.

NOTICE

This operation overwrites any data already existing at the destination range.

Operation

[PATTERN]



[F6] CHAIN



[REC]



[

] (Play)

Operation

[PATTERN]



[F6] CHAIN



[EDIT]

Top measure of destination

Source range

Destination Song

Top measure of the destination Song

Summary of Contents for MOX8

































































































































































Search results

Summary of Contents for MOX8

Reviews:

Related manuals for MOX8

Brands by name

Popular brands

Yamaha MOX8, Reference Manual

Search results

Summary of Contents for MOX8

Reviews:

Related manuals for MOX8

Brands by name

Popular brands