Yamaha MOTIF ES6, Data List

Page: 34 / 88

LOW RESOLUTION
NOISY
ATTACK LOFI
DIGITAL TURNTABLE
DIGITAL SCRATCH
AUTO SYNTH
TECH MODULATION
JUMP
ISOLATOR
SLICE
No. Parameter Range Value Table No.
01 Mod Depth 0 – 127 (0 – 127)
02 Mod Delay Offset 1 – 127 (1 – 127)
03 Mod Feedback -63 – +63 (1 – 127)
04 Resolution 1,1/2 – 1/128 (0 – 7)
05 Mod Mix Balance 0 – 127 (0 – 127)
06 Phase Inverse R off, wet, wet+dry (0 – 2)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
No. Parameter Range Value Table No.
01 Mod Depth 0 – 10 (0 – 10)
02 Mod Speed 0 – 127 (0 – 127)
03 Mod Feedback -63 – +63 (1 – 127)
04 Mod Mix Balance 1 – 127 (1 – 127)
05 Drive 0 – 127 (0 – 127)
06 AM Speed 0.00Hz – 39.7Hz (0 – 127) 1
07 AM Depth 0 – 127 (0 – 127)
08 LPF Frequency 1.0kHz – 20.0kHz (34 – 60) 3
09 LPF Resonance 1.0 – 12.0 (10 – 120)
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 EQ Frequency 100Hz – 10.0kHz (14 – 54) 3
12 EQ Gain -12 – +12dB (52 – 76)
13 EQ Width 1.0 – 12.0 (10 – 120)
No. Parameter Range Value Table No.
01 Sensitive 0 – 127 (0 – 127)
02 Resolution 1, 1/2 – 1/32 (0 – 5)
03 Peak Frequency 100Hz – 10.0kHz (14 – 54) 3
04 LPF Frequency 1.0kHz – 20.0kHz (34 – 60) 3
05 Flanger Speed 0.00Hz – 39.7Hz (0 – 127) 1
06 Flanger LFO Wave tri, sine, saw up, saw down (0 – 3)
07 Flanger Depth 0 – 127 (0 – 127)
08 Flg Depth Ofst R -63 – +63 (1 – 127)
09 Flg Mix Balance 1 – 127 (1 – 127)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Flanger Delay 0.1 – 650.0ms (1 – 6500)
12 Flg Delay Ofst R 0 – -884 (0 – 884)
13 Flanger Feedback -63 – +63 (1 – 127)
14 Flanger FB Ofst R -63 – +63 (1 – 127)
15 Flanger FB HiDamp 0.1 – 1.0 (1 – 10)
16 FB HiDamp Ofst R -0.9 – +0.9 (1 – 19)
No. Parameter Range Value Table No.
01 Click Density 0 – 5 (0 – 5)
02 Click Level 0 – 127 (0 – 127)
03 Noise Tone 0 – 6 (0 – 6)
04 Noise Mod Speed 0.00Hz – 39.7Hz (0 – 127) 1
05 Noise Mod Depth 0 – 127 (0 – 127)
06 Dry Send to Noise 0 – 127 (0 – 127)
07 Noise LPF Freq 1.0kHz – 20.0kHz (34 – 60) 3
08 Noise LPF Q 1.0 – 12.0 (10 – 120)
09 Noise Level 0 – 127 (0 – 127)
11 Dry Level 0 – 127 (0 – 127)
12 Dry LPF Frequency 1.0kHz – 20.0kHz (34 – 60) 3
No. Parameter Range Value Table No.
01 Input Level 0 – 127 (0 – 127)
02 Initial Delay 0.1 – 460.0ms (1 – 4600)
03 Scratch Speed 1 – 127 (1 – 127)
04 Scratch Depth 0 – 127 (0 – 127)
05 Auto Pan Speed 0.00Hz – 39.7Hz (0 – 127) 1
06 Auto Pan Depth 0 – 127 (0 – 127)
07 EQ Frequency 100Hz – 10.0kHz (14 – 54) 3
08 EQ Gain -12 – +12dB (52 – 76)
09 EQ Width 1.0 – 12.0 (10 – 120)
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 HPF Frequency 20Hz – 8.0kHz (0 – 52) 3
No. Parameter Range Value Table No.
01 Mod Speed 0 – 127 (0 – 127)
02 Mod Wave Type typeA, typeB, typeC, typeD (0 – 3)
03 Mod Depth 0 – 127 (0 – 127)
04 Mod Depth Ofst R -63 – +63 (1 – 127)
05 HPF Frequency 20Hz – 8.0kHz (0 – 52) 3
06 LPF Frequency 1.0kHz – 20.0kHz (34 – 60) 3
07 Delay Time 0.1 – 370.0ms (1 – 3700)
08 Delay Time Ofst R 0 – 884 (0 – 884)
09 Delay Level 0 – 127 (0 – 127)
10 Dry Mix Level 0 – 127 (0 – 127)
11 Feedback Level -63 – +63 (1 – 127)
12 FB Level Ofst R -63 – +63 (1 – 127)
13 AM Speed 0.00Hz – 39.7Hz (0 – 127) 1
14 AM Wave tri, sine, saw up, saw down (0 – 3)
15 AM Depth 0 – 127 (0 – 127)
16 AM Inverse R normal, inverse (0 – 1)
No. Parameter Range Value Table No.
01 Mod Speed 0 – 127 (0 – 127)
02 Mod Depth 0 – 127 (0 – 127)
03 Mod Gain -12 – +12dB (52 – 76)
04 Mod Mix Balance D63>W – D=W – D<W63 (1 – 127)
05 Pre Mod HPF Freq 20Hz – 8.0kHz (0 – 52) 3
06 Mod LPF Frequency 1.0kHz – 20.0kHz (34 – 60) 3
07 Mod LPF Resonance 1.0 – 12.0 (10 – 120)
08 Delay Time 0.1 – 740.0ms (1 – 7400)
09 Delay Time Ofst R 0 – 884 (0 – 884)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Feedback Level -63 – +63 (1 – 127)
12 FB Level Ofst R -63 – +63 (1 – 127)
13 Feedback Hi Damp 0.1 – 1.0 (1 – 10)
14 FB Hi Damp Ofst R -0.9 – +0.9 (1 – 19)
No. Parameter Range Value Table No.
01 Depth 0 – 127 (0 – 127)
02 Speed 0 – 127 (0 – 127)
03 Direction L<>R, L>>R (0 – 1)
04 Type typeA, typeB, typeC (0 – 2)
05 Jump Wave Type typeA, typeB, typeC, typeD (0 – 3)
06 Resolution 1,1/2 – 1/256 (0 – 8)
07 HPF Frequency 20Hz – 8.0kHz (0 – 52) 3
08 LPF Frequency 1.0kHz – 20.0kHz (34 – 60) 3
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
No. Parameter Range Value Table No.
01 On/off SW on, off (0 – 1)
02 Low Level -64 – +63 (0 – 127)
03 Mid Level -64 – +63 (0 – 127)
04 High Level -64 – +63 (0 – 127)
05 Low Mute off/on (0 – 1)
06 Mid Mute off/on (0 – 1)
07 High Mute off/on (0 – 1)
No. Parameter Range Value Table No.
01 Divide Type 16th – 4th (5 – 11) 14
02 Gate Time 0 – 100% (0 – 100)
03 Pan Aeg Type A – E (0 – 4)
04 Pan Aeg Min Level 0 – 127 (0 – 127)
05 Pan Depth -63 – +63 (1 – 127)
06 Divide Min Level 0 – 127 (0 – 127)
07 Pan Type A – J (0 – 9)
08 Drive 0 – 127 (0 – 127)
09 AEG Phase 0 – 15 (
x
16th note) (0 – 15)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
12 Set Slice Tempo --- ---
13 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
14 EQ Low Gain -12dB – +12dB (52 – 76)
15 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
16 EQ High Gain -12dB – +12dB (52 – 76)
34
Data List
Effect Parameter List