Yamaha Montage 6, Service Manual, Page: 54 / 158

54
MONTAGE6/MONTAGE7
1-6. Control condition
Unless otherwise specified, set control knobs as follows. Set others in the default state by turning the power on.
[MASTER VOLUME] slider : Max
A/D INPUT [GAIN] knob : Max
Control Slider 1–8 : Max
[FOOT CONTROLLER 1, 2] : Min
FOOT SWITCH [ASSIGNABLE] : Off
FOOT SWITCH [SUSTAIN] :
Off
Pitch Bend Wheel : Center
Modulation Wheel : Min
1-7. Measurement unit
0 dBu = 0.775 Vrms
2. Test mode
2-1. Starting up Test mode
There are two methods to start up Test mode.
Method 1
1)
While pressing keys [C#2], [F2], [G#2] (C#2 major chord) simultaneously, turn on the [STANDBY/ON] switch.
MONTAGE6
MONTAGE7
C1 C2 C3
C1 E0 C2 C3
[STANDBY/ON]
C#2 F2 G#2
C#2 F2 G#2
Method 2
1)
While pressing the buttons [KNOB POSITION 1] and [CONTROL ASSIGN] simultaneously, turn on the [STANDBY/
ON] switch.
[KNOB POSITION 1]
[CONTROL ASSIGN]
[STANDBY/ON]