MonitorMix User Guide
11
PIN use
Examples of PIN use are provided below. In both of these examples each performer is not notified of the PIN in use.
Example 1. When a mixing engineer prepares smart devices
to be used by performers
The mixing engineer finishes installing MonitorMix to smart devices,
configures Wi-Fi settings and PIN settings, and selects the bus used by
performers in advance.
Performers receive a smart device with MonitorMix running, and
proceed to adjust monitor mix levels. If a performer receives a smart
device that is not running MonitorMix, the performer can tap the
[Resume] button on the SELECT MIXER screen to automatically
connect using the previously set PIN and bus.
Example 2. When using a performer’s smart device
Mixing engineers connect the mixer to the Wi-Fi access point and set
the PIN for the mixer in advance.
After downloading and installing MonitorMix to their smart device,
performers hand their smart device to the mixing engineer to have the
mixing engineer connect it to Wi-Fi.
The mixing engineer starts up MonitorMix, selects the mixer and enters
its PIN, and then selects the bus used by the performer.
After selecting the bus, the mixing engineer hands back the smart
device to the performer to adjust monitor mix levels.
