20
■
WDM CH (for Windows only)
Specifies whether the WDM driver is used for the audio output from the computer. Audio channels
that use the WDM driver are assigned to 31st and 32nd Out Connectors of the node.
Before using the WDM driver, make sure you have set the Sounds and Audio
Devices Properties window correctly. (See the section on troubleshooting the
computer system sound output from mLAN audio channels in the Installation
Guide).
■
Icon
Enables you to change the node icon (page 13).
■
Bkgrnd Color
Enables you to change the background color of the nodes.
■
OK
Confirms the settings and closes the window.
■
Cancel
Cancels the settings and closes the window.
■
Setup
If the node represents a computer, clicking the [Setup] button displays the mLAN Driver Setup
window (refer to “Changing settings after installation” in the Installation Guide).
If the node represents an mLAN device, clicking the [Setup] button displays the mLAN Control
Panel window (refer to “Connecting a Computer to an mLAN Device via mLAN” in the installation
Guide).
NOTE
Node Information (MIDI) window
