Yamaha midnightstar XV1900A Owner'S Manual Download

Page: 28 / 88

INSTRUMENT AND CONTROL FUNCTIONS

3-14

EAU13211

Fuel

Make sure that there is sufficient fuel in
the tank. Fill the fuel tank to the bottom
of the filler tube as shown.

WARNING

EWA10880

●

Do not overfill the fuel tank, oth-
erwise it may overflow when the
fuel warms up and expands.

●

Avoid spilling fuel on the hot en-
gine.

CAUTION:

ECA10070

Immediately wipe off spilled fuel
with a clean, dry, soft cloth, since
fuel may deteriorate painted surfac-
es or plastic parts.

EAU13390

CAUTION:

ECA11400

Use only unleaded gasoline. The use
of leaded gasoline will cause severe
damage to internal engine parts,
such as the valves and piston rings,
as well as to the exhaust system.

Your Yamaha engine has been de-
signed to use premium unleaded gaso-
line with a research octane number of
95 or higher. If knocking (or pinging) oc-

curs, use a gasoline of a different
brand. Use of unleaded fuel will extend
spark plug life and reduce maintenance
costs.

1. Fuel tank filler tube

2. Fuel level

Recommended fuel:

PREMIUM UNLEADED GASOLINE
ONLY

Fuel tank capacity:

17.0 L (4.49 US gal) (3.74 Imp.gal)

Fuel reserve amount (when the fuel
level warning light comes on):

3.0 L (0.79 US gal) (0.66 Imp.gal)

U5C4E2E0.book Page 14 Friday, September 7, 2007 4:17 PM

Summary of Contents for midnightstar XV1900A

























































































Search results

Summary of Contents for midnightstar XV1900A

Reviews:

Related manuals for midnightstar XV1900A

Brands by name

Popular brands

Yamaha midnightstar XV1900A, Owner'S Manual

Search results

Summary of Contents for midnightstar XV1900A

Reviews:

Related manuals for midnightstar XV1900A

Brands by name

Popular brands