Yamaha midnightstar XV1900A Owner'S Manual Download

Page: 64 / 88

PERIODIC MAINTENANCE AND MINOR REPAIR

6-21

CAUTION:

ECA10590

If any damage is found or the front
fork does not operate smoothly,
have a Yamaha dealer check or re-
pair it.

EAU23280

Checking the steering

Worn or loose steering bearings may
cause danger. Therefore, the operation
of the steering must be checked as fol-
lows at the intervals specified in the pe-
riodic maintenance and lubrication
chart.

1. Place a stand under the engine to

raise the front wheel off the
ground.

WARNING

EWA10750

Securely support the vehicle so that
there is no danger of it falling over.

2. Hold the lower ends of the front

fork legs and try to move them for-
ward and backward. If any free
play can be felt, have a Yamaha
dealer check or repair the steering.

U5C4E2E0.book Page 21 Friday, September 7, 2007 4:17 PM

Summary of Contents for midnightstar XV1900A

























































































Search results

Summary of Contents for midnightstar XV1900A

Reviews:

Related manuals for midnightstar XV1900A

Brands by name

Popular brands

Yamaha midnightstar XV1900A, Owner'S Manual

Search results

Summary of Contents for midnightstar XV1900A

Reviews:

Related manuals for midnightstar XV1900A

Brands by name

Popular brands