MG206C-USB/MG206C
38
1-2, 3-4 switch
ON when taking measurement only / OFF otherwise
ST switch
ON when taking measurement only / OFF otherwise
Channel fader
Maximum
• MASTER control
GROUP1-2, 3-4 Master fader (STEREO)
Maximum
GROUP1-2, 3-4 TO ST ASSIGN switch
OFF
STEREO Master fader (STEREO)
Maximum
AUX1, AUX2, AUX3, AUX4 SEND Master level control
Maximum
RETURN1 to AUX1, AUX2 ST level control
Maximum
RETURN2 to AUX1, AUX2 ST level control
Maximum
MONITOR/PHONES level control
Maximum
STEREO/GROUP switch
STEREO (OFF)
1-2/3-4 switch
1-2 (OFF)
2TR IN/USB level control
Minimum
TO STEREO/TO MONITOR switch
OFF (TO STEREO)
• OTHERS
PHANTOM switch
OFF
2-3
The input signal should be 1 kHz sine wave unless otherwise specified.
2-4
The input signal impedance should be 150
Ω
. (Balance input)
2-5
Power indicator
When turning on the power, check the power indicator lights up.
2-6
Gain
With controls set as specified in the section 2-2, check the output levels are in the range specified in the table 2-6-1 to 2-6-6.
Summary of Contents for MG206c-USB
