Yamaha MG12XUK, Owner'S Manual

Page: 15 / 28

MG12XUK Owner’s Manual 15
Controls and Functions
Top panel
Internal effect section (Output:
q
to
u
)
q
Display
Indicates the effect program number selected with the
[PROGRAM] knob
w
. The number flashes during selec-
tion; however, if several seconds pass without a selec-
tion being made, the program returns to the last number
selected.
w
[PROGRAM] knob
Selects one of the 24 internal effects from 1-24. Turn the
knob to select the desired effect program, and then
press the knob to actually set it. For instructions on how
to apply the effect, see the section “Applying Effects” on
page 17.
NOTE
Turning the knob while pressing it down also allows you to
simultaneously select and set the effect program (without
needing to press the knob finally to set it).
e
[PARAMETER] knob
Adjusts the parameter (depth, speed, etc.) for the
selected effect. The last value used with each effect pro-
gram is saved. For details about the parameter, see the
“Effect Programs” list on page 17.
NOTE
When you change to a different effect program, the unit auto-
matically restores the value that was previously used with that
program (regardless of the current position of the [PARAME-
TER] knob). Once you turn the [PARAMETER] knob, the value
of current knob position will become valid.
r
Effect program list
This is the list of the internal effect programs. For details
about the programs, see the “Effect Programs” list on
page 17.
t
[FX ON] switch
When the switch is turned on ( ), the switch lights
indicating the internal effect is active. If you turn off the
internal effect with the foot switch when the switch is on
( ), the LED of the switch flashes.
y
[FX RTN LEVEL] knob
Adjusts the volume of the internal effect sound.
u
[FOOT SW] jack
For connecting an optionally available unlatched type
footswitch, such as the Yamaha FC5. When the [FX ON]
switch
t
is turned on ( ), the internal effects can be
toggled on/off with the footswitch as needed with your
foot. This jack supports a phone plug.