MG10XUF Owner’s Manual
18
Troubleshooting
When No Sound Is Output
Refer to this section when no sound is output or the volume is very low. This information is for when sound is output from the
[STEREO OUT] jacks or the [PHONES] jack.
For details about these functions, see “Controls and Functions” on pages 12 – 16.
STEP 1
Connections and Signal Flow
Check if the instruments, microphones, and speakers are connected correctly, and if any of the cables are damaged.
DI
[PHONES] jack
[STEREO OUT] jacks
When connecting guitars
or basses to the MG, use
DI boxes.
1
Signal is input
from a micro-
phone or
instrument.
3
Route signals from channels to the master block.
2
Adjust tone and
level for each
channel.
5
The signal is output to speakers
and/or headphones.
4
Make final adjustments to
the level of the signal.
Summary of Contents for MG10XUF
Page 26: ...MG10XUF Owner s Manual 26 ...
Page 27: ......