TROUBLESHOOTING
56
None of the
controls other
than the volume
control have
any effect on
the client.
The client is locked from the
server.
Use the server to remove the lock.
MCX-1000
Owner’s
Manual,
page 93
Starting
playback on the
client produces
interference
noise on nearby
radios.
The client and the radio are too
close to each other.
Place the client and the radio at
least one meter apart.
—
There is a
significant
pause between
playback of
songs on the
client.
This is normal when listening
with the client.
—
You cannot
access a preset
radio station on
a YAMAHA AV
receiver
connected to
your
MusicCAST
system.
The ANALOG REC LEVEL
on the front panel of the server
is set too low.
Increase the ANALOG REC
LEVEL.
MCX-1000
Owner’s
Manual,
page 29
The parameters for the AV
receiver connected to the
server are incorrect.
Configure the AV receiver
parameters correctly.
MCX-1000
Owner’s
Manual,
page 122
The AV receiver connected to
the server is not turned on.
Turn the AV receiver on.
—
The AV receiver is not
correctly connected to the
server.
Correctly connect the AV receiver
to the server.
MCX-1000
Owner’s
Manual,
page 13
The AV receiver is not
receiving a strong radio signal.
Refer to the owner’s manual of
your AV receiver.
—
Playback cuts
off or switches
to another input
when listening
to a tuner
preset on the
client.
Another MusicCAST
component is changing the
tuner preset or external input
on the server.
Stop the other MusicCAST
component from changing input
sources.
—
Problem
Cause
Remedy
Refer to
page
00_MCX-C15_Owner_UB.book Page 56 Tuesday, April 20, 2004 9:32 PM
