SYSTEM OPTIONS
48
4
Press
u
/
d
to choose “Variable” or
“Fixed” and press SELECT.
Variable
Controls the playback volume and
tone using the client settings.
Fixed
Controls the playback volume and
tone using the external component
settings. In this case, you cannot
control the playback volume and
tone using the client.
• Depending on the settings of the external
component you are using, this function may not
work as described above.
• If “Fixed” is selected in step 4, the volume output
level of your client is set to maximum. In this case,
adjust the volume level on the connected
component before starting playback.
If you will not be using your client for an extended
period, you can place it in sleep mode. Power
consumption is reduced in sleep mode, but the client
still consumes a small amount of power to keep the
display and remote control signal receiver in
operation.
Press .
The message “Please wait.” is displayed and the
client switches to sleep mode.
The current time appears in the display.
y
To display the time correctly, check the server
connections, or change the time display setting on
the server as follows:
Press
u
/
d
to choose “System Setup” - “Date/
Time” - “Time Display”, then choose “24 hours” or
“12 hours (AM/PM)”, and press SELECT. Press
u
/
d
/
j
/
i
to choose “OK” and press SELECT.
The client automatically switches to sleep mode if
no operation is performed for 30 minutes.
Notes
AUDIO OUT
Variable
Fixed
Sleep mode
Note
LIBRARY
VOL
FAVORITES
SELECT
BOOKMARK
MENU
INPUT
PLAY
INFO.
GROUP
GROUP
PLAY
OFF TIMER ON TIMER
PAUSE
1
2
3
4
5
6
7
S
STOP
RANDOM
REPEAT
RECALL
MUTE
1
2
3
4
MCX-3 WD01440
button
Please wait.
PM
00_MCX-C15_Owner_UB.book Page 48 Tuesday, April 20, 2004 9:32 PM
