HANDY FUNCTIONS
39
LIST
EN
ING
T
O
MUSIC
• Make sure the server is set to ON or LAN standby
mode when using the ON Timer function to start
playback from a client. For details, see the
MCX-1000 Owner’s Manual, page 18.
• You can choose from two different time display
settings (12-hour and 24-hour) on the server. This
setting can be changed as follows:
Press
u
/
d
to choose “System Setup” - “Date/
Time” - “Time Display”, then choose “24 hours”
or “12 hours (AM/PM)”, and press SELECT.
Press
u
/
d
/
j
/
i
to choose “OK” and press
SELECT.
You can use this function to enjoy the same song
from different locations around your home.
When the server is set to Broadcast mode, the song
being played back on the server is distributed
simultaneously to all clients set up to receive
Broadcast playback.
Make sure the server is in Broadcast mode before
carrying out the following procedure on your client.
• One or more clients must be set up on the server
before Broadcast playback will begin.
• Starting Broadcast playback on a client or the
server turns off the OFF Timer and ON Timer
functions. Further, the Timer functions do not
return to their previous state when Broadcast
playback stops. Reset these functions as required.
• You may experience a difference of up to 0.2
seconds in playback synchrony between clients.
■
To add clients into Broadcast
playback
1
Press and hold MENU until the Top
Menu screen is displayed.
Notes
Broadcast function
Notes
LIBRARY
VOL
FAVORITES
SELECT
BOOKMARK
MENU
INPUT
PLAY
INFO.
GROUP
GROUP
PLAY
OFF TIMER ON TIMER
PAUSE
1
2
3
4
5
6
7
S
STOP
RANDOM
REPEAT
RECALL
MUTE
1
2
3
4
MCX-3 WD01440
2-3
1
00_MCX-C15_Owner_UB.book Page 39 Thursday, May 6, 2004 10:38 AM
