Yamaha MCR-730 Service Manual Download Page 27

Page: 27 / 71

DRX-730/NX-E700

DRX-730/NX-E70

Reverse

Forward

Main menu select

Reverse

Forward

Sub-menu select

●

Operation procedure of Main menu and Sub-menu

There are 11 menu items, each of having sub-menu items.

Main menu selection

Select the menu using “

” (Forward) and “

” (Reverse) keys of this unit.

Sub-menu selection

Select the sub-menu using“

” (Forward) and “

” (Reverse) keys of this unit.

Keys of this unit

●

Functions in Self-Diagnostic Function mode

In addition to the self-diagnostic function menu items, functions listed below are available.

• Input

selection

• Muting
• Power

on/off

Functions related to the tuner and the set menu are not available.

●

Initial setting used to start Self-Diagnostic Function

The following initial setting is used when starting self-diagnostic function.
When self-diagnostic function is canceled, this setting is restored to that before starting self-diagnostic function.

• Input:

AUX

Summary of Contents for MCR-730








































































Search results

Summary of Contents for MCR-730

Reviews:

Related manuals for MCR-730

Brands by name

Popular brands

Yamaha MCR-730, Service Manual

Search results

Summary of Contents for MCR-730

Reviews:

Related manuals for MCR-730

Brands by name

Popular brands