Memo
• When the default LED mode is set to “LINK/ACT” mode, you will be able to
check the connection status between the network equipment and your
computer. For details on switching between modes or on the connection status,
refer to “
Switching the default LED mode for the port indicators
”.
4.3. Installing an SFP module
You can install an SFP module to the SFP+ ports of this product.
Caution
• Attach the dust covers onto the SFP+ ports that are not in use. Failing to do so
could allow foreign objects to enter, causing malfunctions. When you take the
dust covers off, keep them in a safe place to avoid misplacing them.
Memo
• For details on compatible SFP modules, refer to the corresponding item in
.
• Also refer to the owner’s manuals included with each module for details on
attaching and removing the modules, as well as for points of caution.
1. Remove the dust cover that is affixed to this product’s SFP+ port, and insert the SFP module.
Memo
• Since this product supports hot-swapping, an SFP module can be installed
without turning the power off.
2. Remove the protective cap from the SFP module.
SFP module
SFP module
Protective cap
Protective cap
SFP+ ports
SFP+ ports
4. Connections
L2 SWITCH SWX2320-16MT User Guide |
21
