background image

19

ENGLISH

FRANÇAIS

DEUTSCH

SVENSKA

ITALIANO

ESPAÑOL

DUTCH

Type ..................................... Auto reverse 4-track, 2-channel

recording and playback stereo double cassette deck

Motors ......................................... DC servo motor x 2 (main)
Heads

KX-W592 ............ Recording/playback: Hard Permalloy x 2

                                               Erase: Double-gap Ferrite x 2

KX-W492/KX-W392

........................ Recording/playback: Hard Permalloy x 1

                                               Erase: Double-gap Ferrite x 1

Playback: Hard Permalloy x 1

Rapid Transport .......................................... 100 sec. (C-60)
Wow and Flutter

WRMS ...................................................................... 0.08%
W.Peak ................................................................... ±0.15%

Signal-to-Noise Ratio

(Dolby NR off) ........................................................... 58 dB
(Dolby B NR on) ....................................................... 66 dB
(Dolby C NR on) ....................................................... 74 dB

Frequency Response (–20 dB)

<KX-W592/KX-W492>

Type I/Normal .............................. 20 ~ 17,000 Hz ±3 dB
Type II/High (CrO

2

....................  20 ~ 18,000 Hz ±3 dB

Type IV/Metal .............................. 20 ~ 20,000 Hz ±3 dB

<KX-W392>

Type I/Normal .............................. 20 ~ 16,000 Hz ±3 dB
Type II/High (CrO

2

....................  20 ~ 17,000 Hz ±3 dB

Type IV/Metal .............................. 20 ~ 19,000 Hz ±3 dB

Harmonic Distortion

KX-W592/KX-W492 .................................... less than 0.8%
KX-W392 .................................................... less than 1.0%

Input Sensitivity/Impedance

Line ................................... 100 mV/40 k-ohms (KX-W592)

100 mV/43 k-ohms (KX-W492/KX-W392)

Output Level

Line .................................. 570 mV/1.8 k-ohms (KX-W592)

570 mV/1.4 k-ohms (KX-W492/KX-W392)

Phones .................................. 0.08 mV/8 ohms (KX-W592)

0.25 mV/8 ohms (KX-W492/KX-W392)

Channel Separation (1 kHz) ...................... more than 40 dB
Crosstalk (125 Hz) ..................................... more than 55 dB

SPECIFICATIONS

GENERAL

Power Supply

U.S.A. and Canada model ........................... 120 V, 60 Hz
Europe model and U.K. model .................... 230 V, 50 Hz
Australia model ............................................ 240 V, 50 Hz
General model .................... 110/120/220/240 V, 50/60 Hz

Power Consumption

KX-W592 ................................... 19 W/9 W (POWER OFF)
KX-W492 ................................... 14 W/7 W (POWER OFF)
KX-W392

U.S.A. and Canada model .... 11 W/7 W (POWER OFF)
Other models ........................ 12 W/7 W (POWER OFF)

Dimensions (W x H x D) ...................... 435 x 146 x 283 mm

(17-1/8" x 5-3/4" x 11-1/8")

Weight ................................ 5.1 kg (11 lbs. 4 oz.) (KX-W592)

5.0 kg (11 lbs.) (KX-W492/KX-W392)

Accessory

Audio cord ................................................................ 1 pair

* Specifications subject to change without notice.

Summary of Contents for KX-W392





















Reviews: