manualshive.com logo in svg

Yamaha KODIAK 450 Ultramatic, Owner'S Manual, Page: 75 / 189

Share
Download
Yamaha KODIAK 450 Ultramatic Owner'S Manual Download Page 75

7-3

WARNING

_ 

Indicates a potential hazard that could
result in serious injury or death.

GETTING TO KNOW YOUR ATV 

This ATV is mainly for utility use, but may also
be used for recreation. This section, Riding
your ATV, provides general ATV riding in-
structions for recreational riding. The skills
and techniques described in this section,
however, are appropriate for all types of
riding. Riding your ATV requires special skills
acquired through practice over a period of
time. Take the time to learn the basic tech-
niques well before attempting more difficult
maneuvers.

Riding your new ATV can be a very enjoyable
activity, providing you with hours of pleasure.
But it is essential to familiarize yourself with
the operation of the ATV to achieve the skill
necessary to enjoy riding safely. Before you

begin to ride, be sure you have read this
Owner’s Manual completely and understand
the operation of the controls. Pay particular at-
tention to the safety information on pages 2-1–
2-6. Please also read all caution and warning
labels on your ATV.

U5ND10.book  Page 3  Friday, March 8, 2002  11:47 AM

Summary of Contents for KODIAK 450 Ultramatic






























































































































































































Reviews:

No comments