manualshive.com logo in svg

Yamaha KODIAK 450 Ultramatic, Owner'S Manual, Page: 64 / 189

Share
Download
Yamaha KODIAK 450 Ultramatic Owner'S Manual Download Page 64

6-5

Shifting: Neutral to Reverse and Reverse
to Park

NOTE:

_ 

The drive select lever cannot be shifted into or
from reverse or park without applying the rear
brake. 

_

1. Bring the machine to a complete stop

and return the throttle lever to the closed
position.

2. Apply the rear brake pedal.
3. Shift from neutral to reverse or from re-

verse to park and vice versa by moving
the drive select lever along the shift
guide.

1. Drive select lever

NOTE:

_ 

●

When in reverse, the reverse indicator
light should be on. If the light does not
come on, ask a Yamaha dealer to inspect
the reverse indicator light electrical cir-
cuit.

●

Due to the synchronizing mechanism in
the engine, the light may not come on un-
til the ATV starts moving. 

_

4. Check behind for people or obstacles,

then release the rear brake pedal.

U5ND10.book  Page 5  Friday, March 8, 2002  11:47 AM

Summary of Contents for KODIAK 450 Ultramatic






























































































































































































Reviews:

No comments