manualshive.com logo in svg

Yamaha KODIAK 450 Ultramatic, Owner'S Manual, Page: 5 / 189

Share
Download
Yamaha KODIAK 450 Ultramatic Owner'S Manual Download Page 5

AFFIX DEALER

LABEL HERE

EBU00011

IMPORTANT NOTICE

This machine is designed and manufactured for OFF-ROAD use only. It is illegal and unsafe to
operate this machine on any public street, road or highway.
This machine complies with all applicable OFF-ROAD noise level and spark arrester laws and
regulations in effect at the time of manufacture.
Please check your local riding laws and regulations before operating this machine.

EBU01067

YFM450FAR

OWNER’S MANUAL 

©2002 by Yamaha Motor Corporation, 

U.S.A. 

2nd edition, September 2002

All rights reserved. Any reprinting or 
unauthorized use without the written 

permission of 

Yamaha Motor Corporation, 

U.S.A. is expressly prohibited. 

Printed in U.S.A. 

P/N LIT-11626-16-01

E_Info.fm  Page 2  Tuesday, September 17, 2002  10:16 AM

Summary of Contents for KODIAK 450 Ultramatic






























































































































































































Reviews:

No comments