Yamaha KB-180, Service Manual

Page: 9 / 46

9
KB-180/SKB-180
Master volume knob
AM
Push knob
AM
AM
(AMJK 5/6)
AM (AMJK 4/6)
MIDI
(AMJK 1/6)
(AMJK 2/6)
LCD unit
[A] [A]
[210C]
[210B] [210B]
Upper case assembly
[210B] [210E] [210E] [210D]
[210A]
<Rear view>
<Bottom view>
[210F]
[210G]
3. AM Circuit Board
(Time required: About 4 minutes)
3-1 Remove the “MASTER VOLUME” knob as shown
in Fig. 4. (Fig. 4)
3-2 Remove the screw marked [210A]. (Fig. 6)
3-3 Remove the lower case assembly. (See procedure 1.)
3-4 Remove the seven (7) screws marked [210B],
three (3) screws marked [210C] and two (2)
screws marked [210D]. The AM circuit board can
then be removed. (Fig. 6)
3-5 Pull out the push knob from the AM circuit board.
(Fig. 5)
4. LCD Unit
(Time required: About 3 minutes)
4-1 Remove the lower case assembly. (See procedure 1.)
4-2 Remove the two (2) screws marked [210E] and
four (4) screws marked [210F]. The LCD unit can
then be removed. (Fig. 6)
Fig. 4
Fig. 5
[210]: Bind Head Tapping Screw-B 3.0X8 MFZN2W3 (WE774300)
Fig. 6