En
31
Using the alarm function
Engl
ish
Setting the alarm time
with the unit
1
Press and hold
.
•
and set alarm time will flash.
2
Press
/
to set the alarm time.
3
(when alarm types other than BEEP are
selected) Press either
or
to
select music source.
•
Depending on the circumstances of the source
selected at the alarm time, sound may not be
output.
Continue to the next page
\
3
1
2
3
•
The alarm setting will be erased if the system
enters standby mode without properly
completing it.
•
Set the alarm type by using “MusicCast
CONTROLLER.”
•
You can use buttons on the unit to set the alarm.
1
Press and hold
ALARM
.
2
Press
VOLUME -/+
to set the alarm time.
3
(When selecting an alarm type other than BEEP)
Press either of the
SOURCE
buttons to select
the source to play back.
4
(When selecting an alarm type other than BEEP)
Use
PRESET
to specify the song/radio station
to play back.
-
Pressing the button once will resume the
content.
-
To specify the track or ratio station to play back,
press the button repeatedly until the specified
preset number is displayed.
5
Press
ALARM
to finish the alarm setting.
