5
■
Computer TCP/IP setting (for Dante)
To update Dante firmware, configure computer TCP/IP settings.
Windows
1.
Open the Network and Sharing Center as described below.
Windows 7
Select [Start]
→
[Control Panel], then click or double-click [Network and Sharing Center] or [View network
status and tasks].
Windows 8.1 and Windows 10
Right-click [Start]
→
[Control Panel], then click or double-click [Network and Sharing Center] or [View network
status and tasks].
The “Network and Sharing Center” is displayed.
2.
Click [Manage network connection] or [Change Adapter settings] from the “Tasks” list located in the
left side of “Network and Sharing Center” window, then double-click [Local Area Connection].
The "Local Area Connection Status" dialog box will be displayed.
・
The "User Account Control" dialog box may appear. Click [Continue] or [Yes].
・
If the "Local Area Connection properties" dialog box appears, skip ahead to step 4.
3.
Click [Properties].
The “Local Area Connection properties” dialog box will be displayed.
・
The "User Account Control" dialog box may appear. Click [Continue] or [Yes].
4.
Select [Internet Protocol Version 4 (TCP/IPv4)], then click [Properties].
The "Internet Protocol Version 4(TCP/IPv4) Protocol" dialog box will be displayed.
5.
Click [Obtain an IP address automatically].
6.
Click [OK].
