11
Described below are the procedures to recover the Dante module integrated in the HY144-D.
1.
Turn off the power to the device to which the HY144-D is installed.
2.
Separate the HY144-D from the Dante network.
3.
Connect the Dante [PRIMARY] connector of the HY144-D to the Ethernet connector on the computer
using an Ethernet cable.
In some cases, an error may occur during recovery if you are going through a network switch. Connect the
computer with the HY144-D in a one-to-one connection.
4.
Turn on the power to the device to which the HY144-D is installed.
5.
Disable all but one of the network interfaces on your computer.
You should also disable the wireless LAN.
6.
Windows: Select [Start]
→
[All programs]
→
[Audinate]
→
[Dante Firmware Update Manager]
→
[Dante
Firmware Update Manager ]
, then right-click and select “Run as Administrator.”
Mac: [Application]
→
[Dante Firmware Update Manager], then double-click “Dante Firmware Update
Manager.”
The Dante Firmware Update Manager will start up.
・
The "User Account Control" dialog box may appear. Click [Continue] or [Yes].
7.
If you see the interface selection screen, select the interface card to connect the Dante device.
8.
Click [Failsafe Recovery].
