52
En
SET MENU
Maximum volume
MAX VOL.
Use this feature to set the maximum volume level. This
feature is useful to avoid the unexpected loud sound by
mistake. For example, the original volume range is 16 dB
to –80 dB. However, when “MAX VOL.” is set to –5 dB,
the volume range becomes –5.0 dB to –80.0 dB.
Control range:
16 dB
,
10 dB to –30 dB
Control step: 5 dB
The “MAX VOL.” setting takes priority over the “INI.VOL.”
setting. For example, if “INI.VOL.” is set to –20 dB and “MAX
VOL.” is set to –30 dB, the volume level is automatically set to
–30 dB when you turn on the power of this unit next time.
Initial volume
INI.VOL.
Use this feature to set the volume level when the power of
this unit is turned on.
Choices:
OFF
, –80 dB to +16 dB
Control step: 1 dB
The “MAX VOL.” setting takes priority over the “INI.VOL.”
setting.
Use this menu to reassign the input jacks, select the
decoder mode or rename the input source.
■
Input assignment
A)INPUT ASSIGN
Use this feature to assign the input jacks according to the
component to be used if the initial settings of this unit do
not correspond to your needs. Change the following
parameters to reassign the respective jacks and effectively
connect more components.
Once the input jacks are reassigned, you can select the
corresponding component by using
D
INPUT
l
/
h
(or
the input selector buttons (
C
)).
For COAXIAL INPUT jack 1
COAXIAL IN (1)
Choices: (1) CD, MD/CD-R,
DVD
,
DTV/CBL,
V-AUX,
DVR
For OPTICAL INPUT jacks 2 and 3
OPTICAL IN (2)
OPTICAL IN (3)
Choices: (2) CD, MD/CD-R, DVD,
DTV/CBL
,
V-AUX, DVR
(3)
CD
, MD/CD-R, DVD, DTV/CBL,
V-AUX, DVR
You cannot select a specific item more than once.
Note
Note
2 INPUT MENU
Note
;
MANUAL SETUP
2 INPUT MENU
.
A)INPUT ASSIGN
B)INPUT RENAME
C)VOLUME TRIM
D)DECODER MODE
E)MULTI CH SET
[ ]/[ ]:Up/Down
p
p
[ENTER]:Enter
A)INPUT ASSIGN
COAXIAL IN
.
(1)
;;;;;
DVD
(
DVD
)
[ ]/[ ]:Select
p
[
2 INPUT MENU
A)INPUT ASSIGN
OPTICAL IN
.
(2)
;;;;;
DTV/CBL
(DTV/CBL )
(3)
;;;;;
CD
(
CD
)
[ ]/[ ]:Select
p
[
2 INPUT MENU
