SELECTING THE SCENE TEMPLATES
28
En
This unit is equipped with 15 preset SCENE templates for
various situations of using this unit. As the initial factory
setting, the following SCENE templates are assigned to
each SCENE button:
SCENE 1:
DVD Viewing
SCENE 2:
Disc Listening
SCENE 3:
TV Viewing
SCENE 4:
Radio Listening
If you want to use other SCENE templates, you can select
the desired SCENE templates from the SCENE template
library and assign the templates to the selected SCENE
buttons on the front panel and the remote control.
1
Press and hold the desired
F
SCENE
(or
E
SCENE
) button for 3 seconds.
The indicator on the selected SCENE button on the
front panel starts to flash, and the name of the
currently assigned SCENE template appears in the
front panel display.
2
Press
D
INPUT
l
/
h
(or press
D
AMP
and
then press
G
l
/
h
) to select the desired
template.
3
Press the
F
SCENE
(or
E
SCENE
) button
again to confirm the selection.
The selected SCENE template is assigned to the
button.
• If you do not carry out any operation within 30 seconds from
the last operation in these steps, this procedure is automatically
canceled.
• Once the desired SCENE templates are assigned to the
corresponding SCENE buttons, you may need to set the input
source of the SCENE template on the remote control. See
page 56 for details.
Selecting the SCENE templates
Selecting the desired SCENE
template
1
SCENE template library
(Image)
Select the desired SCENE
template
Assign the
SCENE
template to the
SCENE button
1
1
1
or
Remote control
Flashes
3 seconds
3 seconds
Front panel
DVD Viewing
Notes
l
INPUT
h
AMP
ENTER
or
Front panel
Remote control
DVD MovieView
1
1
or
Remote control
Front panel