background image

HTR-5890

23

HTR-5890

5. SPEAKERS SET

The input signal is automatically identified in the order
of dts 

 DOLBY DIGITAL 

 AAC

 PCM 

 Analog.

There are seven sub-menu items as follows. The
signals output from the DSP block are the same as 1.
DA601-YSS930: YSS 0dB.

LARGE:

This mode is used with a speaker with high

bass reproduction performance (a large
unit). Full bandwidth signals are output.

SMALL:

This mode is used with a speaker with low
bass reproduction performance (a small
unit). The signals of 90Hz or less are mixed
into the channel specified by LFE/BASS.

The analog switch settings for each sub-menu are as
shown in the table below.

FRONT: SMALL 0dB

SURROUND L/R: NONE

LFE: BASS: FRONT

SURROUND L/R: MUTE

PRESS MIX: 5ch

SURROUND BACK: MUTE

CENTER: NONE

Reference data
INPUT: DVD ANALOG
SUBWOOFER: 50Hz, Others: 1kHz

Sub-menu

CENTER SP SURROUND SP FRONT SP LFE/BASS

1

FRONT: SMALL 0dB

LARGE

LARGE

SMALL

SWFR

2

CENTER: NONE

NONE

LARGE

LARGE

SWFR

3

LFE/BASS: FRONT

SMALL

SMALL

LARGE

MAIN

4

PRESS MIX: 5CH

LARGE

LARGE

LARGE

SWFR

5

SURROUND BACK: MUTE

LARGE

LARGE

LARGE

SWFR

6

SURROUND: MUTE

LARGE

LARGE

LARGE

SWFR

7

SURROUND: NONE

LARGE

NONE

LARGE

SWFR

NONE:

This mode is used with no center speaker.
The center content is reduced by 3dB and
distributed to FRONT L/R.

Sub-menu

Input level

Volume

SPEAKER OUTPUT

SUBWOOFER

FRONT L/R

CENTER SURROUND L/R SURROUND BACK

OUTPUT

1 FRONT: SMALL 0dB 1 kHz Both ch, -20 dBm +6.5 dB

+13.5 dBm +13.5 dBm +13.5 dBm +13.5 dBm

-3.0 dBm

2 CENTER: NONE

1 kHz Both ch, -20 dBm +6.5 dB

+10.5 dBm

+13.5 dBm +13.5 dBm

-7.0 dBm

3 LFE/BASS: FRONT

1 kHz Both ch, -20 dBm +6.5 dB

+13.5 dBm +13.5 dBm +13.5 dBm

50 Hz Both ch, -20 dBm +6.5 dB

+24.0 dBm

+4.5 dBm

+4.5 dBm

+4.5 dBm

-7.0 dBm

4 PRESS MIX:  5CH 1 kHz Both ch, -20 dBm +6.5 dB

+13.5 dBm +13.5 dBm +13.5 dBm +13.5 dBm

-7.0 dBm

5 SURROUND BACK: MUTE 1 kHz Both ch, -20 dBm +6.5 dB

+13.5 dBm +13.5 dBm +13.5 dBm +13.5 dBm

-7.0 dBm

6 SURROUND: MUTE 1 kHz Both ch, -20 dBm +6.5 dB

+13.5 dBm +13.5 dBm

+13.5 dBm

-7.0 dBm

7 SURROUND: NONE 1 kHz Both ch, -20 dBm +6.5 dB

+13.5 dBm +13.5 dBm +13.5 dBm +13.5 dBm

-7.0 dBm

Summary of Contents for htr-5890










































Reviews: