Yamaha HTR-5860 Owner'S Manual Download Page 76

Page: 76 / 103

ADVANCED SETUP MENU

The ADVANCED SETUP menu is displayed in the front
panel display.

• During the advanced setup procedure, audio output is muted.
• During the advanced setup procedure, only the STANDBY/ON

and STRAIGHT (EFFECT) buttons, and PROGRAM selector
buttons on the front panel are available for operation.

Be sure to set the speaker impedance before using this unit
to play back audio or video signals.

Turn off the power to this unit, and while
holding down STRAIGHT (EFFECT), press
STANDBY/ON.

This unit turns on, and the ADVANCED SETUP
menu appears in the front panel display.

Rotate PROGRAM to move through the menu
and select the item you want to set up.

See the end of this section for a complete list of
available parameters.

Press STRAIGHT (EFFECT) repeatedly to
toggle between the available parameters.

Press STANDBY/ON to confirm your
selection.

This completes the advanced setup procedure.
The settings you made are reflected the next time this
unit’s power is turned on.

ADVANCED SETUP MENU

CAUTION

PURE DIRECT

PRESET/TUNING

EDIT

FM/AM

A/B/C/D/E

PRESET/TUNING/CH

INPUT MODE

TONE CONTROL

MULTI CH

INPUT

STRAIGHT

EFFECT

MEMORY

MAN'L/AUTO FM

LEVEL

NEXT

TUNING MODE

AUTO/MAN'L MONO

VOLUME

PROGRAM

INPUT

STANDBY

/ON

OPTIMIZER

MIC

PHONES

SILENT CINEMA

SPEAKERS

OPTICAL

AUDIO

VIDEO

S VIDEO

VIDEO AUX

SEARCH MODE

CATEGORY

DISPLAY

1,4

1,3

(U.S.A. model)

EFFECT

STRAIGHT

STANDBY

/ON

While holding
down, press

PROGRAM

EFFECT

STRAIGHT

STANDBY

/ON

01EN_HTR-5860_U.book Page 72 Thursday, December 30, 2004 12:27 PM

Summary of Contents for HTR-5860








































































































Search results

Summary of Contents for HTR-5860

Reviews:

Related manuals for HTR-5860

Brands by name

Popular brands

Yamaha HTR-5860, Owner'S Manual

Search results

Summary of Contents for HTR-5860

Reviews:

Related manuals for HTR-5860

Brands by name

Popular brands