Yamaha HTR-5860 Owner'S Manual Download Page 93

Page: 93 / 103

TROUBLESHOOTING

ADDITI

NAL

INFO

RMA

IO
N

■

Remote control

Problem

Cause

Remedy

Refer to

page

The remote control
does not work nor
function properly.

Wrong distance or angle.

The remote control will function within a maximum
range of 6 m (20 ft) and no more than 30 degrees off-
axis from the front panel.

Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.

Reposition this unit.

—

The batteries are weak.

Replace all batteries.

The remote control code was not correctly
set.

Set the remote control code correctly using “LIST OF
REMOTE CONTROL CODES” at the end of this
manual.

Try to set another code for the same manufacturer
using “LIST OF REMOTE CONTROL CODES” at
the end of this manual.

The remote control ID and this unit’s ID
do not match.

Switch the library code.

Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.

01EN_HTR-5860_U.book Page 89 Thursday, December 30, 2004 12:27 PM

Summary of Contents for HTR-5860








































































































Search results

Summary of Contents for HTR-5860

Reviews:

Related manuals for HTR-5860

Brands by name

Popular brands

Yamaha HTR-5860, Owner'S Manual

Search results

Summary of Contents for HTR-5860

Reviews:

Related manuals for HTR-5860

Brands by name

Popular brands