Yamaha HTR-3067 Owner'S Manual Download Page 61

Page: 61 / 97

CONFIGURATIONS

➤

Configuring various functions (Setup menu)

ECO

Configures the power supply settings.

• Default settings are underlined.

■

Auto Power Standby

Set the amount of time for the auto-standby function.

Settings

Default

U.K. and Europe models: 20 minutes

Other models: Off

• Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in

the front display.

■

ECO Mode

Enables/disables the eco (power saving) mode.

When the eco mode is enabled, you can reduce the unit’s power consumption by
keeping the maximum volume, maximum output power, or front display’s brightness
low.

Settings

• Be sure to press ENTER to restart the unit after selecting a setting. The new setting will take effect

after the unit is restarted.

Off

Does not set the unit to standby mode automatically.

20 minutes

Sets the unit to standby mode when you have not operated the unit
and the unit has not detected any input signal for the specified time.

2 hours, 4 hours,
8 hours, 12 hours

Sets the unit to standby mode when you have not operated the unit for
the specified time.

Off

Disables the eco mode.

Enables the eco mode.

00_RX-V377_om_U.book Page 61 Friday, October 18, 2013 1:13 PM

Summary of Contents for HTR-3067


































































































Search results

Summary of Contents for HTR-3067

Reviews:

Related manuals for HTR-3067

Brands by name

Popular brands

Yamaha HTR-3067, Owner'S Manual

Search results

Summary of Contents for HTR-3067

Reviews:

Related manuals for HTR-3067

Brands by name

Popular brands