Yamaha HTR-3067 Owner'S Manual Download Page 58

Page: 58 / 97

CONFIGURATIONS

➤

Configuring various functions (Setup menu)

Enables/disable SCENE link playback when “HDMI Control” is set to “On”.

When SCENE link playback is enabled, HDMI Control-compatible devices
connected to the unit via HDMI automatically works as follows, with a scene
selection.

• TV: turning on and displaying video from the playback device

• Playback device: starting playback

Choices (SCENE keys)

BD/DVD, TV, CD, RADIO

Settings

Default

BD/DVD, TV: On

CD, RADIO: Off

• SCENE link playback may not work properly due to the compatibility between devices. We

recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.

SCENE

Off

Disables SCENE link playback for the selected SCENE key.

Enables SCENE link playback for the selected SCENE key.

00_RX-V377_om_U.book Page 58 Friday, October 18, 2013 1:13 PM

Summary of Contents for HTR-3067


































































































Search results

Summary of Contents for HTR-3067

Reviews:

Related manuals for HTR-3067

Brands by name

Popular brands

Yamaha HTR-3067, Owner'S Manual

Search results

Summary of Contents for HTR-3067

Reviews:

Related manuals for HTR-3067

Brands by name

Popular brands